top of page

Interior Design Studio

786a5ce8-dd7a-4b54-b22e-97f4786fbf66_edited.png

Laundry Cabinet Design for Singapore Homes: Layouts and Sizes

Writer: Monarch
Monarch
Nov 6
10 min read

Singapore laundry cabinet with built-in washer

A good laundry cabinet does three jobs: it hides the machines, gives you a surface to fold on, and keeps detergent, baskets and drying gear within arm’s reach. In a Singapore flat, where the washer often sits in a kitchen corner or service yard, the best designs start from your machine’s exact measurements, then build storage, ventilation and a folding counter around it. Below is how we plan that, step by step.



TL;DR

 

  • Plan the laundry run as three zones: dirty, washing, clean. Place hampers, detergent and the folding counter in that order.

  • Measure your own machines first, then add the door swing, ventilation gaps and a clear standing space in front.

  • Side-by-side machines suit a continuous counter above; stacked machines suit a tall cabinet with shelves beside them.

  • In our humid climate, choose moisture-tolerant materials, ventilated panels and sealed edges so the joinery lasts.

  • Monarch Carpentry Design Studio receives great reviews and feedback for great design at modest cost, and we build every cabinet with our in-house carpenters.

 

Table of Contents

 

 

Start with the laundry sequence, not the cabinet

 

Most laundry cabinets disappoint because they were drawn as storage boxes first and as a workflow second. Laundry follows a sequence: sort, wash, dry, fold, put away. A layout guide for builders links planning to that same sequence and recommends a landing surface near the machines, so the space works as a set of stations instead of scattered storage.

 

We use a simple three-zone model with every homeowner:

 

  1. Dirty zone. Where clothes wait before washing. A pull-out hamper drawer with two or three compartments (whites, colors, delicates) is the upgrade clients most often ask us to keep in the plan.

  2. Washing zone. The machines, plus detergent, softener and stain treatments within easy reach but out of children’s reach.

  3. Clean zone. A folding counter, hanging rail and shallow shelves or drawers for towels and linens.

 

When the dryer door opens onto a clear counter, folding happens straight away instead of piling up in a basket. That is why we put the counter directly adjacent to the dryer, or above it when machines are side by side.

 

Choosing a layout: side-by-side, stacked or tucked into a closet

 

Your layout depends on the width you have, whether you own a washer and a separate dryer, and whether the area is open to the kitchen or sits in a utility space.

 

Layout

Best for

Cabinet approach

Side-by-side machines

Wider alcoves, service yards, utility corners

One continuous counter over both machines, with open shelves or wall cabinets above

Stacked washer and dryer

Narrow alcoves, bathroom corners, closets

Full-height cabinet with doors, a tall side unit for supplies, a pull-out hamper below or beside

Washer-dryer combo (single machine)

Small flats and kitchen-adjacent corners

Front-facing cabinet recess with a shallow counter and storage above

Machines hidden in the kitchen run

Open-plan homes

Panel-fronted doors that match the kitchen joinery

For side-by-side machines, a counter spanning both appliances with two or three shelves running the full width treats the wall as one working zone and greatly increases folding and storage capacity. We favor this approach where the alcove is wide enough, because it turns an awkward appliance gap into the most useful surface in the home.

 

If the washer is part of the kitchen, the same thinking applies as in our guide to getting a flush integrated kitchen with carpentry tips: consistent panel lines, concealed ventilation and doors that open without catching. For compact flats, our overview of kitchen layout planning for a new flat in Singapore shows how to decide early where the washer goes, before the kitchen cabinets are fixed.

 

Laundry cabinet dimensions: what to measure and why

 

There is no single standard cabinet size, because machines vary by brand and model. What matters is a repeatable process. These are the measurements we take on site, and the ones you should have ready before any drawing is finalized.

 

Machine dimensions

 

Measure the width, depth and height of each machine from its installation manual, then add the depth of the water inlet and drain hoses behind it. Many front-loaders are around 60 cm wide, but models differ, so use your own model’s specification sheet rather than a rule of thumb.

 

Gaps around the machines

 

A manufacturer’s installation guide is the best reference for clearances. In its planning guide for 24-inch (about 60 cm) front-loading laundry pairs, Fisher & Paykel lists a minimum cabinetry gap of 3/4 inch (about 2 cm) from the edge of the product and 1 inch (about 2.5 cm) from the rear. For a stacked layout it lists a minimum washer door clearance to the adjacent wall of 13 inches (about 33 cm) and a dryer door clearance of 12 3/16 inches (about 31 cm). Those figures apply to that brand’s models. Your machine’s manual gives the numbers that count for your warranty, and we build to those.


Gaps around the machines

Counter height and depth

 

A folding counter at roughly 36 inches (about 91 cm) high and at least 24 inches (about 61 cm) deep gives folding room without crowding the machines. In Singapore homes, we often adjust the height to match the adjoining kitchen counter so the lines run through. If you are noticeably taller or shorter than average, tell your designer, because a counter that is a few centimeters off makes daily folding tiring.

 

Upper cabinets above machines

 

Front-loaders need the top of the machine to stay clear of obstruction. One renovation guide suggests 24-inch deep upper cabinets mounted at least 36 inches above the machine for door clearance and ventilation. Treat this as a starting point and compare it with your machine’s manual. We usually keep the zone directly above the machines for open shelving or a clothes rail, and reserve closed upper cabinets for the sides.

 

Standing room in front

 

You need space to stand, open the door and bend down. One layout guide suggests a single-wall side-by-side arrangement needs at least 6 feet (about 1.8 m) of width, with around 36 inches (about 91 cm) clear in front of the washer and 42 inches (about 107 cm) in front of the dryer. In a small flat you may not reach those numbers, which is a good reason to choose sliding or bi-fold doors rather than swing doors in a tight passage.

 

Designing for Singapore: humidity, heat and ventilation

 

Laundry joinery in Singapore works harder than almost any other cabinet in the home. Dryers release warm, moist air, washers spill and leak occasionally, and the baseline humidity is high all year. Our approach comes down to a few design habits:

 

  • Ventilate the dryer properly. Leave the gaps specified by the manufacturer, route the exhaust or condensate as the model requires, and add discreet vent slots or open backs where a cabinet would otherwise trap heat.

  • Protect the base. Keep the bottom of the cabinet raised off the floor or use a moisture-resistant plinth, and seal all cut edges, since edges absorb moisture first.

  • Use wipeable surfaces. Laminates and sealed finishes on counters and drawer fronts handle detergent spills better than open-grain surfaces.

  • Plan access to taps and isolators. Make water shut-off points reachable through a removable panel so a plumber never has to dismantle the cabinet.

  • Think about moisture inside closed storage. For linens and towels, ventilated shelves or a dedicated drying cabinet help. We explain our thinking in our piece on humidity control cabinets.

 

If your washer sits in a service yard or covered utility area, check what is allowed for any alterations with your building’s management or the relevant authority before changing the layout. Your designer can guide you on the right approval route for your property type.

 

Storage that earns its space

 

A laundry cabinet that looks tidy on day one but is awkward to use by week three has been over-designed. These are the features we recommend most often.

 

Pull-out hamper drawer

 

A divided hamper that slides out beside or beneath the counter keeps dirty clothes hidden and pre-sorted. Smooth runners matter: a loaded hamper is heavy, and wobbling or sticking drawers are the usual complaint. Our article on pull-out pantry choices that stop wobble and bad finish covers the hardware thinking that applies equally here.


Divided hamper drawer beneath laundry counter

Deep drawers and narrow pull-outs

 

A narrow pull-out beside the machines holds detergent bottles, pods and a stain remover, so nothing sits on top of the washer. Deep drawers under the counter suit towels and bed linen.

 

Hanging rail and drying space

 

A retractable or fixed rail above the counter gives you a place to hang shirts straight from the dryer or air-dry delicates. Many Singapore homeowners prefer to air-dry a portion of the laundry, so we plan a place for this inside the design rather than leaving it to an improvised rack.

 

Tall cabinet for cleaning gear

 

Brooms, a mop, an ironing board and an iron fit in a full-height cabinet with a slim door. Add a hook strip inside for the ironing board, and a shallow shelf for the iron to cool.

 

Pet supplies

 

If you have a cat, the laundry corner is often where its supplies end up. A furniture-style litter box enclosure designed for laundry rooms can sit near the machines, though the right distance from the washer and the ventilation matter, so plan it into the layout from the start.

 

For wider ideas on making every centimeter work, see our guide to storage optimization for Singapore homes.

 

Custom, semi-custom or ready-made?

 

Homeowners often ask whether built-to-measure joinery is worth it for a space as small as a laundry nook. Ready-made cabinets work when the alcove is a standard width and perfectly square. Singapore flats rarely are: walls, pipes and floor levels vary, and a gap of even a couple of centimeters on either side of a machine looks unfinished or wastes storage.

 

Bespoke carpentry fills the exact opening, allows for vent slots and service access, and lets the finishes match the kitchen or the rest of the home. It also avoids stacking filler panels to hide mismatches. We tailor the design to your budget, which is where our reputation comes from: Monarch Carpentry Design Studio receives great reviews and feedback for great design at modest cost. We do not publish fixed prices, because the cost depends on size, materials and hardware, so we quote after a consultation and measurement.

 

Perspective: why we design the laundry as a working station

 

We have installed enough laundry corners in Singapore homes to know what separates a cabinet that looks good in a render from one that still works two years later. It comes down to treating the laundry as a workflow and a piece of building services, not as a box to hide appliances.   Our in-house designers and carpenters work on the same project from the first sketch, so the person drawing the vent slot is the person who will cut it. That cohesion is what lets us commit to precision on site: the door swing is checked against the real machine, the shut-off valve is reachable, and the counter lines up with the kitchen.   We also believe good joinery should be cost-effective. A slightly smarter layout, such as moving the hamper to a pull-out beside the machines or using one continuous counter instead of two separate pieces, often delivers more daily convenience than an expensive finish. Our aim is interiors that are beautiful, practical and built to last.   Seth Wayne

 

How we work with you on a laundry cabinet

 

Our process is collaborative, from first conversation to handover.

 

  1. Consultation. We discuss how your household does laundry, how many people you are washing for, and whether you air-dry or tumble-dry.

  2. Site measurement. We record the alcove, the pipes and outlets, the floor level and the machine specifications.

  3. Design. Our designers produce layouts and material options within your budget, tied to the rest of the home.

  4. Build and install. Our in-house carpenters produce and fit the joinery, coordinating with any plumbing or electrical work.

  5. Handover. We check door swing, drawer action and access points together with you.

 

If you are renovating a new flat, the earlier we see the laundry location, the more choices you have, because pipes and power points are cheapest to position before the walls and flooring are finished.

 

Plan your laundry cabinet with Monarch

 

Monarch is a design and carpentry studio based in Singapore, handling interior design, design and build, and bespoke carpentry for homes, offices and hospitality spaces. Bring your floor plan and your machine model, and we will map out a laundry layout that fits.


Monarch carpenters

To see what we build, browse our completed projects, or book a consultation and see our services to start your laundry cabinet design.

 

A short checklist before you sign off the drawings

 

  • Machine model numbers and installation manuals are in hand.

  • Door swings, both machine doors and cabinet doors, have been checked against the walls and each other.

  • Vent gaps, hose and drain routes, and the shut-off valve access are marked on the drawing.

  • The counter height matches the people who use it daily.

  • Hamper capacity suits your household’s laundry volume.

  • Finishes are moisture-tolerant, with edges sealed.

  • There is a place to hang or air-dry clothes.

 

FAQ

 

What size should a laundry cabinet be?

 

It depends on your machines, not on a fixed standard. Take the machine’s width, depth and height from its manual, add the manufacturer’s required gaps at the sides and rear, and leave space for hoses and door swing. Your designer will then size the cabinet and counter to the real opening.

 

Can I build a cabinet over a washer and dryer?

 

Yes, in most layouts. Side-by-side machines can carry a continuous counter, and stacked machines can sit in a full-height cabinet with a ventilated opening. Always follow the manufacturer’s clearance and ventilation requirements, because dryers need airflow and service access.

 

What materials work best for laundry cabinets in Singapore?

 

Choose moisture-resistant boards, sealed edges and wipeable laminate or similarly durable finishes, especially on the counter and base. High humidity and occasional spills make these details more important here than in drier climates. We advise on options at the design stage so the finish suits both your budget and the conditions.

 

How do I hide a washer and dryer in a small flat?

 

Use full-height doors that match the surrounding joinery, ideally sliding or bi-fold in tight spaces. Include discreet ventilation slots, and make sure the doors can open fully before the machines run. This gives a clean look without trapping heat.

 

Does Monarch design laundry cabinets as part of a full renovation?

 

Yes. Our services include interior design, design and build, and bespoke carpentry, so a laundry cabinet can be planned alongside your kitchen and storage. Contact us through our consultation page to discuss your home.

 

Sources

 

Recommended

 

 
 
 

Comments


bottom of page